Quote:
Hi thinking to change the low Country Platforms that have the slope on them.
Remove the slope and make non track tiles of different types put add to the stations.
I think that is a good idea!
But for that you need at least a couple of 1x1 non-track tiles, well... Alrighty then!!
1x1 Non-track tilesWhat is different from platformtiles:
- No need to split graphics up into front-of-track and back-of-track, everything drawn on just one full tile will suffice (the other tile is therefor empty)
- No pylons or wires when built from an electrified tracktype
- Trains cannot enter the tile
- Groundtile is now just grass (rather than grass with railtracks), this will automatically adapt to the grass used in the various climates (just like the grass in the platform- and waypointtiles), so no need to fill in the entire tile with structures and grass (except when you want the groundtile to look different, like fully covered with tarmac or mowed grass, etc etc, then you do need to draw that in, otherwise just leave it transparent)
This is the code example:
118 * 6 01 04 01 FF 06 00
119
c:/grfcodec603/auzstations/gfx/template_nontrack_1x1_8bpp_EMPTY.png 8bpp 10 40 64 122 -31 -91 normal chunked
|
c:/grfcodec603/auzstations/gfx/template_nontrack_1x1_32bpp.png 32bpp 10 40 64 122 -31 -91 normal chunked
120 c:/grfcodec603/auzstations/gfx/template_nontrack_1x1_8bpp_EMPTY.png 8bpp 90 40 64 122 -31 -91 normal chunked
| c:/grfcodec603/auzstations/gfx/template_nontrack_1x1_32bpp.png 32bpp 90 40 64 122 -31 -91 normal chunked
121 c:/grfcodec603/auzstations/gfx/template_nontrack_1x1_8bpp_EMPTY.png 8bpp 170 40 64 122 -0 -0 normal chunked
| c:/grfcodec603/auzstations/gfx/template_nontrack_1x1_32bpp.png 32bpp 170 40 64 122 -0 -0 normal chunked
122 c:/grfcodec603/auzstations/gfx/template_nontrack_1x1_8bpp_EMPTY.png 8bpp 250 40 64 122 -31 -91 normal chunked
| c:/grfcodec603/auzstations/gfx/template_nontrack_1x1_32bpp.png 32bpp 250 40 64 122 -31 -91 normal chunked
123 c:/grfcodec603/auzstations/gfx/template_nontrack_1x1_8bpp_EMPTY.png 8bpp 330 40 64 122 -31 -91 normal chunked
| c:/grfcodec603/auzstations/gfx/template_nontrack_1x1_32bpp.png 32bpp 330 40 64 122 -31 -91 normal chunked
124 c:/grfcodec603/auzstations/gfx/template_nontrack_1x1_8bpp_EMPTY.png 8bpp 410 40 64 122 -0 -0 normal chunked
| c:/grfcodec603/auzstations/gfx/template_nontrack_1x1_32bpp.png 32bpp 410 40 64 122 -0 -0 normal chunked
125 * 88 00 04 05 01
05 08 "
AS03" 11 00 14 FF 15 FF 09 02
8D 0F 00 00 00 00 00 10 10
03 2D 84 00 00 00 00 00 10 10
03 2E 84 00 00 00 00 80 00 00 00 2F 44 22 03 80
8D 0F 00 00 00 00 00 10 10
03 30 84 00 00 00 00 00 10 10
03 31 84 00 00 00 00 80 00 00 00 32 44 22 03 80
126 * 7 02 04 00 00 01 00 00
127 * 7 02 04 01 00 01 00 00
128 * 10 03 04 01
05 01 FE 01 00 00 00
129 * 28 04 48 FF 01
05 "Å
TEMPLATE NONTRACK 1x1" 00
130 * 35 04 48 FF 01
05 "Ä
AuzStations: Non-Track Tiles" 00
What do you need to change:
-
X Paths/names to graphicsfiles
-
X Station-IDs
-
X Purchasemenu-ID
-
X The hight of the boundingboxes (to the appropriate hight of the highest structure in the tile)
-
X Name you want to give to the tile
-
X Name of Purchase Submenu (see below for suggestions)
It is handy to create/reserve 2 purchase submenu's:
- one for non-track tiles (probably only 1x1 single tiles) not associated with a particular station (so universal tiles that may be used everywhere, like the tiles with walls, or waitingrooms that are used at various stations).
I would call that one: AuzStations: Non-Track Tiles
- one for all other non-track tiles (be it 1x1 or larger sizes) that have particular stationbuilding graphics (based on, or looking exactly like, certain excisting stations in reallife).
I would call that one: AuzStations: Non-Track Stations
This will make it a bit easier for players to search for the tile(s) they want, rather than everything piled up into one submenu
Here are the files you need (codeblock & graphics):
Attachment:
1x1NonTrack_Sources.rar [4.2 KiB]
Downloaded 411 times
This will keep you busy again for some time I think
I will also make templates for 2x1 and 3x1 non-track, that will hopefully be enough I think for now to cover most of the buildings you have made (or want to make
), if you eventually need other sizes, just ask, then I will make those for you on request.
Before I make the 2x1 and 3x1 though, I would like to ask if you also want to make bufferstops?
Those are almost similar to the 1x1 non-track tiles, so that would be a logic follow-up to those